1 förord
At present, the automation system of substations has been widely used in substations at all levels, with high℃of automation and stable operation status. In actual operation, it fully utilizes the characteristics of advanced technology and reliable operation. The widespread application of substation automation systems in county-level substations has played a positive and crucial role in upgrading the protection monitoring system, improving the automation level of substations, Att uppnå schemaläggningsautomation och automatisk mätaravläsning, konstruera obemannade transformatorstationer och minska arbetskraften och öka effektiviteten .
2 problem i den faktiska driften
2.1 Backend Monitoring Machine
2.1.1 Whether to set up a background monitoring machine. Currently, there are two views on whether to set up a background monitoring machine for county-level substation automation systems: one is to set up a background monitoring machine, and the other is not to set up a background monitoring machine. The first viewpoint is that current substations are still manned by multiple or few people, and setting up backend monitoring machines is convenient for Övervakning och hantering, installation och felsökning av övervakning och skyddssystem på plats, testning och justering av skyddsinställningar och fråga om olycksregister; The second viewpoint is that substations will eventually become unmanned, so there is no need to set up backend monitoring machines. In fact, due to the condition of the equipment, the fact that most county bureaus have not yet established dispatch automation systems, and the inability to immediately achieve unmanned operation, new and renovated substations still have on duty personnel. Even if true unmanned operation can be achieved in the future, it will still take a long time. Therefore, based on practical needs, substations should be equipped with background monitoring machines. Therefore, when ordering substation automation systems, background monitoring machines and corresponding monitoring software should be ordered at the same time to prevent reordering and increasing investment if they cannot meet actual needs.
2.1.2 Hantering av Backend Monitoring Machine Operation
Practice has shown that the operation and management of backend monitoring machines are very important. In actual operation, there have been multiple instances where the backend monitoring machine has been paralyzed and unable to work due to human factors and the monitoring machine itself. Some substations have experienced multiple incidents within a year, mostly caused by human factors, seriously affecting the overall operation of the substation. Therefore, in order to prevent this situation from happening, firstly, it is necessary to establish a system for the operation and management of the substation's backend monitoring machine and strictly enforce it. The on duty personnel should be restrained to prevent the use of the backend monitoring machine to play games or surf the internet, and to prevent the unauthorized use of floppy disks and CDs to infect the monitoring machine with viruses. Once the Backend Monitoring Machine är förlamad på grund av mänskliga skäl, den bör strikt straffas enligt systemet, och inte tolereras . Samtidigt bör andra vara varnade . den andra är att stärka den regelbundna och oregelbundna inspektioner av länets byråförvaltningsavdelning, identifiera problem, hantera dem omedelbart, och lämna ingen framtid, och lämna ingen framtid, och lämna ingen framtid, och lämna ingen framtid. System- och övervakningsprogramvara . Endast länsbyråförvaltningsavdelningen och Substation Master har tillgång till lösenordet, och vanlig pliktpersonal har inte tillgång till lösenordet . Detta är för att förhindra obehörig åtkomst till operationssystemet och start och stänga av 10 -talet, liksom för att förhindra användning av mjukvara och hårdvaror resurser och bakgrundsåtgärder och deras förstörelse är 10 {10.}}}}}) Paketera operativsystemet med övervakningsprogramvara, till exempel Backend Monitoring -programvaran för Dongfang Electronics DF1331 Automation System, som har funktionen att kapsla in operativsystemet efter uppstart . inkapsling av övervakningsprogramvaran för det att den övervakar mjukvaran som kommer att komma till Monmoning -mjukvaran tills det kommer att gå upp till Monmoning till Monmoning TO OM -monitor tills Monmoning -Monmoner kommer att vara att Monmoning -monitoren kommer att komma till Monmoning -mjukvaran på Monmoning till Monmoning THE MONOTRAGE AV MONOTERNING interface. If the monitoring software is stopped, a password needs to be entered, and only those who master the password can stop the monitoring software and enter the operating system. At present, some backend monitoring software of substation automation systems do not have this function, which should be resolved jointly with the manufacturer's technical personnel. The encapsulation of operating system functions in monitoring software is very Effektivt för att förhindra att bakgrundsövervakningsmaskinen används och skadas av andra . När du väljer backendövervakningsprogramvara bör uppmärksamhet ägnas åt att välja produkter med denna funktion för att förbättra säkerheten och tillförlitligheten för backend -övervakningssystemets drift .}
2.1.3 Bakgrundsövervakningsmaskinen bör välja en industriell kontrolldator
Due to the requirement of real-time operation, large data processing capacity, fast response speed, and strong electromagnetic environment of the background monitoring machine, ordinary computers cannot meet the requirements. Therefore, high-performance industrial control computers should be selected when choosing. High performance industrial control computers can operate in strong electromagnetic environments, have strong anti-interference performance, can run in real-time, have good hardware device stability, and can meet the requirements of substation backend monitoring systems. At present, in some substations, due to the extensive use of commercial, household, and other computers in the background monitoring machines, there have been cases where the background monitoring machines are damaged and unable to work. High performance industrial control computers can ensure the safe and stable operation of the substation backend monitoring system.
2.1.4 Backend Monitoring Machine ska vara utrustad med en oavbruten strömförsörjning
I vissa transformatorstationer finns det ingen oavbruten strömförsörjning som är konfigurerad för bakgrundsövervakningsmaskinen, och stationens växelströmförsörjning används istället . Det finns följande nackdelar med att använda stationstransformatorns strömförsörjning: För det första, när systemet tappar ström, förlorar bakgrundsmaskinen kraften och kan inte fungera; Den andra frågan är att växelströmspänningen för den ockuperade transformatorn fluktuerar kraftigt, och spänningskvaliteten är ibland inte upp till standard . Ibland är spänningen hög, vilket orsakar att datorn bränner ut . Ibland är spänningen låg, vilket orsakar datorn till felfunktion och inte kan tillhandahålla kvalificerad ström till den bakre delen; För det tredje, när den primära säkringen från stationstransformatorn blåser, förlorar backendövervakningsmaskinen kraft; Fourthly, when the 10kV system is grounded, the AC power supply of the station transformer is severely affected by harmonic interference, which affects the normal operation of the background monitoring machine. At present, some manufacturers produce DC inverter AC inverters, which use on-site DC batteries as the DC power source for the inverters. After inverting the AC power, it is supplied to the background monitoring Maskin för användning, med en kapacitet på 500-1000 va . Konfigurera denna inverter eliminerar behovet av att köpa ytterligare DC -batterier, spara investeringar och uppnå goda resultat .}
2.1.5 Data i realtid och olyckor kan inte lagras i backend -övervakningssystemet
At present, the backend monitoring system of some substation automation systems cannot store real-time data and accident records. With the continuous development of hard disk manufacturing technology, large capacity hard disks have emerged and been widely used. Monitoring software should have the function of storing real-time data at optional time intervals, and should have the function of storing accident records for easy saving, searching, browsing, and printing of historical data and accident poster .
2.2 Skyddsövervakningssystem har inte felfiltreringsanordning
För närvarande har vissa STOR -STOR: s skyddsövervakningssystem inte felfiltreringsenheter . Som ett STOR -automatiseringssystem kan felfiltreringsanordningen vara en väsentlig enhet . när distributionslinjen reser på grund av ett fel, felfiltreringsanordningen registrerar ändringarna i aktuella och felaktiga värden inom 10 eller fler cykler innan och efter det att det är enkelt att göra det lätt att analysera felet på felet {3.}}}}}}}})
2.3 Skydda olyckan och varningsljudsignalerna för övervakningssystemet
The accident and warning sound signals of some substations' protection monitoring systems are controlled by the backend monitoring system. When the backend monitoring machine cannot work, the accident and warning sound signals cannot be sent out, and the duty personnel cannot be prompted to handle the accident or fault, seriously affecting the safe operation of the substation. This situation has occurred several times, causing PT burnout and unknown switch accidents and tripping. For this situation, it is necessary to contact the manufacturer to jointly handle and separate the accident and warning sound signals of the protection monitoring system, which are not controlled by the background monitoring system, to prevent the occurrence of situations where the background monitoring machine cannot send out protection accidents and warning sound signals when it is not working.
2.4 Överförings- och mottagningsbehandling av fjärrkontrolldata och information i skyddsövervakningssystemet
2.4.1 Överföring av fjärrkontrolldata och information
The remote control data and information of some substation automation systems are sent to the dispatch master station through the background monitoring system. When the background monitoring system cannot work normally, the transmission of remote control data and information cannot be sent. This method is not conducive to the transmission of remote control data and information, and should be directly sent to the dispatch master station through the communication unit of the protection and monitoring system, without being controlled by the background Övervakningssystem . På grund av kontrollen av backendövervakningssystemet för överföring av fjärrdata och information har flera transformatorstationer slutat skicka fjärrdata och information till sändningsmasterstationen på grund av felet på backend -övervakningsmaskinen . Denna situation kan endast hanteras av tillverkaren .}}}
2.4.2 fjärrkontrolldata och informationsöverföring, mottagning och bearbetning
At present, some substation automation systems have weak capabilities in sending, receiving, and processing remote control data and information, mainly manifested in the inability to upload protection settings, main transformer gears, etc., and the inability to correctly receive and process functions such as switch remote control operations, modification of settings, and main transformer gear adjustment of the dispatch master station. Due to the existence of this Problemet påverkas automatiseringsnivån för transformatorstationer mycket, vilket inte är gynnsamt för fjärrdrift av utrustning .
3 Sammanfattning
The above problems are some of the more serious issues that arise in the actual operation of substation automation systems. Some can be handled by themselves, while most require manufacturers to handle, and some cannot be handled by manufacturers. The existence of these problems is not conducive to the safe, reliable, and stable operation of substations. When choosing a substation automation system, attention should be paid to whether the Ovanför frågor finns och om den övergripande funktionaliteten för transformatorationsautomationssystemet är komplett . Substationsautomationssystemet är kärnan i transformatorstationen, och att välja ett högkvalitativt substationsautomationssystem är avgörande för det säkra, pålitliga och stabila driften av transformatorstationen .}
Flera problem i Substation Automation System
May 28, 2025 Lämna ett meddelande
Ett par
AC motståndspänningstestareSkicka förfrågan




